Company Info | Home | Info Request Form | Products | MSDS's | Lead Dust Removal

MATERIAL SAFETY DATA SHEET
Sentinel Products Inc. -
51 Northeast 77th Avenue, Minneapolis, MN 55432 -
(763)571-1498 - (FAX)571-1819

SECTION 1
PRODUCT IDENTIFICATION & EMERGENCY INFORMATION
PRODUCT NAME: SENTINEL® EnviroTowels for Lead
SYNONYMS: DISPOSABLE TOWELS PRESOAKED WITH 805™ TSP Final Wash DETERGENT
THIS MATERIAL SAFETY DATA SHEET IS PROVIDED FOR THE LIQUID PORTION OF THIS PRODUCT
EMERGENCY MEDICAL AND SPILL NUMBER: 1-800-228-5635, EXT. 069

SECTION 2
COMPONENT & EXPOSURE DATA
TRISODIUM PHOSPHATE* CAS# 010101-89-0
PEL/TLV Nuisance dust 15mg/m(3)/10mg/m(3)
*SUBJECT TO THE REPORTING REQUIREMENTS OF SARA 312. TRISODIUM PHOSPHATE @ 100% IN POWDER FORM IS A NUISANCE DUST.

SECTION 3
EMERGENCY AND FIRST AID PROCEDURES
EYE CONTACT:If this product comes in contact with eyes, gently flush with large quantities of water for at least 15 minutes. If irritation persists, seek immediate medical attention.
SKIN CONTACT: Remove contaminated clothing. Cleanse affected area(s) thoroughly by washing with mild soap and water. If irritation or redness develops and persists, seek medical attention.
INHALATION: If breathing difficulties, dizziness, or light-headedness occur when working in areas with high vapor concentration, victim should seek air free of vapors. If breathing stops, begin artificial respiration and seek immediate medical attention.
INGESTION (SWALLOWING):If this product is swallowed, induce vomiting. Seek immediate medical advice and/or attention.

SECTION 4
HEALTH HAZARDS & ROUTES OF ENTRY
EYE CONTACT: This product may cause irritation. Direct contact with the liquid or exposure to its’ vapors or mists may cause burning, tearing or redness.
SKIN CONTACT: This product may cause skin irritation. Prolonged or repeated exposure to this material may cause redness, burning, drying or cracking of the skin or dermatitis. Persons with pre-existing skin disorders may be more susceptible to the effects of this material.
INHALATION: If breathing difficulties, dizziness, of light-headedness occur when working in areas with high vapor concentrations, victim should seek air free of vapors. If victim experiences continued breathing difficulties, administer oxygen until medical assistance can be rendered. If breathing stops, begin artificial respiration and seek immediate medical attention.
INGESTION (SWALLOWING): If this product is swallowed, induce vomiting. Seek immediate medical advice and/or attention.
COMMENTS: THIS SUBSTANCE HAS NOT BEEN IDENTIFIED AS A CARCINOGEN OF PROBABLE CARCINOGEN BY NTP, IARC, OR OSHA.

SECTION 5
VENTILATION: If current ventilation practices are not adequate for minimizing exposures, additional ventilation or exhaust systems may be required. Other special precautions such as respiratory masks or environmental containment devices may be required in extreme cases.
RESPIRATORY INFORMATION: Respiratory protection may be necessary to minimize exposure to vapors. The use of respiratory protection depends on vapor concentration above the time-weighted TLV; use a NIOSH approved cartridge respirator or gas mask.
PROTECTIVE GLOVES: The use of gloves impermeable to this material is advised to prevent skin contact and possible irritation. Wear resistant gloves, such as rubber, nitrile, or neoprene.
EYE PROTECTION: Approved eye protection to safeguard against potential eye contact, irritation or injury is recommended.
OTHER PROTECTIVE EQUIPMENT: It is suggested that a source of clean water be available in the work area for flushing eyes and skin. Impervious clothing should be worn as needed.

SECTION 6
REACTIVITY DATA
STABILITY: Stable
HAZARDOUS POLYMERIZATION: Will not occur
INCOMPATIBILITY (MATERIALS TO AVOID): None known.
HAZARDOUS DECOMPOSITION PRODUCTS: Primarily carbon dioxide and some oxides of sulfur.

SECTION 7
PRECAUTION IN CASE OF LEAK OR SPILL: Mop up as much as possible, then flush residue with a large volume of water.
WASTE DISPOSAL METHOD: Dispose of product in accordance with applicable local, county, state and federal regulations.

SECTION 8
STORAGE, SHIPPING, & REGULATORY INFORMATION
HANDLING & STORAGE: Keep containers tightly closed. Keep containers cool and dry.
DOT PROPER SHIPPING NAME: Cleaning Compound, NOI
DOT HAZARD CLASS: Not a regulated material.
HAZARD RATINGS HMIS/NFPA
HEALTH 1/1, FLAMMABILITY 0/0, REACTIVITY 0/0.

SECTION 9
FLASH POINT (TEST METHOD): None to boiling.
AUTO IGNITION TEMPERATURE: N/A
FLAMMABLE LIMITS IN AIR. % BY VOL.
LOWER: N/A
UPPER: N/A
EXTINGUISHING MEDIA: Use foam CO2 or dry chemical fire fighting apparatus.
FIRE AND EXPLOSION HAZARD: Not determined.
FIRE FIGHTING PROCEDURES: The use of a self-contained breathing apparatus is recommended for fire fighters. Water may be unsuitable as an extinguishing media, but helpful in keeping adjacent containers cool.
UNUSUAL FIRE AND EXPLOSION HAZARD: N/A

SECTION 10
PHYSICAL DATA
BOILING POINT (0F): 215-290o F.
SPECIFIC GRAVITY (H2O=1): ~1.03
VAPOR PRESSURE: Not known.
MELTING POINT: N/A
SOLUBILITY IN WATER: Complete.
VAPOR DENSITY: Not known.
APPEARANCE & ODOR: Green-Slight/Characteristic.
EVAPORATION RATE: Slower than ether.

SECTION 11
DOCUMENTARY INFORMATION DISCLAIMER OF EXPRESSED OR IMPLIED WARRANTIES The information in this document is believed to be correct as of the date issued. However, no warranty of merchantability, fitness for any particular purpose, or any other warranty is expressed or is to be implied regarding the accuracy or completeness of this information, the results to be obtained from the use of this information or the product, the safety of this product or the hazards related to its use. This information and product are furnished on the condition that the person receiving them shall make his/her own determination as to the suitability of the product for his/her particular purpose and on the condition the he/she assume the risk of his use thereof.

Company Info | Home | Info Request Form | Products | MSDS's | Lead Dust Removal