Material Safety Data Sheet


SECTION I - Material Identity
SECTION II - Manufacturer's Information
SECTION III - Physical/Chemical Characteristics
SECTION IV - Fire and Explosion Hazard Data
SECTION V - Reactivity Data
SECTION VI - Health Hazard Data
SECTION VII - Precautions for Safe Handling and Use
SECTION VIII - Control Measures
SECTION IX - Label Data
SECTION X - Transportation Data
SECTION XI - Site Specific/Reporting Information
SECTION XII - Ingredients/Identity Information



SECTION I - Material Identity
Item Name                               
Part Number/Trade Name                   1680, 1685 DURA-POXY HIGH-GLOSS ACRYLIC ENAMEL PAINT
National Stock Number                    8010P1680
CAGE Code                                KELLY
Part Number Indicator                    A
MSDS Number                              193636
HAZ Code                                 B


SECTION II - Manufacturer's Information
Manufacturer Name                        KELLY-MOORE PAINT COMPANY, INC 
Street                                   987 COMMERCIAL ST
City                                     SAN CARLOS
State                                    CA
Country                                  US
Zip Code                                 94070
Emergency Phone                          800-424-9300
Information Phone                        650-592-8337

MSDS Preparer's Information
Date MSDS Prepared/Revised               07JUN01
Active Indicator                         Y

Alternate Vendors


SECTION III - Physical/Chemical Characteristics
Boiling Point                            212 F
Vapor Density                           
Specific Gravity                         1.318
Evaporation Rate                        
Percent Volatiles by Volume              70
Container Type                           R
Container Pressure Code                  1
Temperature Code                         4
Product State Code                       L


SECTION IV - Fire and Explosion Hazard Data
Flash Point Method                       UNK
Lower Explosion Limit                    NA
Upper Explosion Limit                    NA
Special Fire Fighting Procedures         NONE
Unusual Fire/Explosion Hazards           CLOSED CONTAINERS MAY EXPLODE (DUE TO THE BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT


SECTION V - Reactivity Data
Stability                                YES
Stability Conditions to Avoid            NA
Materials to Avoid                       STRONG OXIDIZING AGENTS
Hazardous Decomposition Products         MAY PRODUCE HAZARDOUS FUMES WHEN HEATED TO DECOMPOSITION AS IN WELDING
Hazardous Polymerization                 NO
Polymerization Conditions to Avoid       WILL NOT OCCUR


SECTION VI - Health Hazard Data
Route of Entry: Skin                     YES
Route of Entry: Ingestion                YES
Route of Entry: Inhalation               YES
Health Hazards - Acute and Chronic       {ACUTE} DIZZINESS, HEADACHE, NAUSEA, CONFUSION, IRRITATION TO UPPER RESPIRATORY TRACT, SKIN & EYE IRRITATION. {CHRONIC} NONE KNOWN
Medical Cond. Aggrevated by Exposure     NONE KNOWN
Emergency/First Aid Procedures           {INHALE} REMOVE TO FRESH AIR. RESTORE BREATHING. CONSULT PHYSICIAN {EYE} FLUSH W/ LARGE VOLUMES OF WATER FOR 15 MIN. GET MED. ATTN {SKIN} WIPE OFF W/ A RAG. WASH THOROUGHLY W/ SOAP & WATER {INGEST} CONSULT HOSPITAL EMERGENCY ROOM OR POISON CONTROL CENTER IMMEDIATELY


SECTION VII - Precautions for Safe Handling and Use
Steps if Material Released/Spilled       VENTILATE AREA TO PREVENT BUILD-UP OF VAPORS. FOR SMALL SPILLS, SOAK UP WITH ABSORBENT. FOR LARGER SPILLS, DIKE ARE W/ ABSORBENT MATERIAL & SCOOP UP LIQUIDS
Waste Disposal Method                    DISCARD IN LAND FILL IN SEALED CONTAINERS AWAY FROM HEAT & FLAME AND IN ACCORDANCE W/ LOCAL REGS 
Handling and Storage Precautions         STORE UPRIGHT IN SEALED CONTAINERS AWAY FROM HEAT & FLAME
Other Precautions                        THIS PRODUCT CONTAINS PIGMENTS WHICH LIKE MOST NATURALLY OCCURRING MINERALS CONTAIN SMALL AMOUNTS OF CRYSTALLINE SILICA. THIS PRESENTS NO HAZARD WHEN APPLYING THE COATING, BUT SANDING IT WILL CAUSE A DUST HAZARD. IARC HAS DETERMINED THAT IF YOU BREATHE CRYSTALLINE SILICA AS A DUST YOU COULD GET CANCER. CONTROL MEASURES SHOULD BE FOLLOWED WHEN YOU SAND THIS PRODUCT & MOST OTHER PAINTS & BUILDING MATERIALS SUCH AS SPACKLES & DRY WALL COMPOUNDS


SECTION VIII - Control Measures
Respiratory Protection                   USE A PARTICLE MASK TO AVOID BREATHING SPRAY MIST OR SANDING DUST IF LOCAL VENTILATION IS ADEQUATE TO KEEP CONCENTRATIONS WITHIN ACCEPTABLE LIMITS. IF LOCAL VENTILATION IS NOT SUFFICIENT, OR WHERE EXPOSURE LIMITS ARE EXCEEDED, WEAR A SUITABLE, PROPERLY FITTED RESPIRATOR FOR ORGANIC VAPORS W/ DUST FILTER AS NEEDED
Ventilation                              LOCAL CROSS-VENTILATION OR MECHANICAL
Protective Gloves                        RECOMMENDED IF NECESSARY TO PREVENT EXTENDED EXPOSURE
Eye Protection                           GLASSES W/ SIDE SHIELDS OR GOGGLES ARE RECOMMENDED TO PREVENT EYE CONTACT
Supplemental Health/Safety Data          REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE


SECTION IX - Label Data
Protect Eye                              NO
Protect Skin                             NO
Protect Respiratory                      NO
Chronic Indicator                        UNKNOWN
Contact Code                             UNKNOWN
Fire Code                                UNKNOWN
Health Code                              UNKNOWN
React Code                               UNKNOWN


SECTION X - Transportation Data


SECTION XI - Site Specific/Reporting Information
Volatile Organic Compounds (P/G)         1
Volatile Organic Compounds (G/L)         119.8388


SECTION XII - Ingredients/Identity Information
Ingredient #                             01
Ingredient Name                          ETHANOL, 2-(2-BUTOXYETHOXY)-
CAS Number                               112345
Percent                                  5
OSHA PEL                                 NE
ACGIH TLV                                NE
Ingredient #                             02
Ingredient Name                          1,2-ETHANEDIOL
CAS Number                               107211
Percent                                  5
OSHA PEL                                 50 PPM
ACGIH TLV                                39.4 PPM
Ingredient #                             03
Ingredient Name                          2,4-PENTANEDIOL, 2-METHYL-
CAS Number                               107415
Percent                                  5
OSHA PEL                                 25 PPM
ACGIH TLV                                25 PPM
Ingredient #                             04
Ingredient Name                          PROPANOIC ACID, 2-METHYL-, MONOESTER WITH 2,2,4-TRIMETHYL-1,3-PENTANEDIOL
CAS Number                               25265774
Percent                                  5
OSHA PEL                                 NE
ACGIH TLV                                NE