| Stability |
YES |
| Stability Conditions to Avoid |
AVOID EXCESSIVE HEAT FOR PROLONGED PERIODS OF TIME |
| Materials to Avoid |
ACIDS, BASES OR STRONG OXIDIZING AGENTS |
| Hazardous Decomposition Products |
CARBON MONOXIDE, CARBON DIOXIDE, ACIDS, ALDEHYDES, HYDROGEN SULFIDE, OXIDES OF SULFUR AND NITROGEN COMPOUNDS |
| Hazardous Polymerization |
NO |
| Polymerization Conditions to Avoid |
WILL NOT OCCUR |
| LD50 - LD50 Mixture |
ORAL LD50 (RAT) 11.4 G/KG (EPOXY) |
| Route of Entry: Skin |
YES |
| Route of Entry: Ingestion |
YES |
| Route of Entry: Inhalation |
YES |
| Health Hazards - Acute and Chronic |
[EYE] IRRITANT. MAY CAUSE STINGING, TEARING, REDNESS, SWELLING AND HAZY VISION. PEROSNS WITH PRE-EXISTING EYE DISORDERS MAY BE MORE SUSCEPTIBLE TO THE EFFECT OF THIS MATERIAL. [SKIN] THIS MATERIAL MAY CAUSE MILD IRRITATION. REDNESS, SWELLING AND ITCHING. BURNING OF SKIN. ALLERGIC SKIN REACTIONS. [INGEST] UNLIKELY. IN EXCESSIVE QUNATITIES PAIN, ABDOMINAL TENDERNESS, ANUSEA, DIARRHEA, BLOOD IN VOMIT & FECES. [INHAL] IRRITATION OF THE UPPER RESPIRATORY TRACT. SORENESS OF THE NOSE AND THROAT, COUGH |
| Carcinogenity: NTP |
NO |
| Carcinogenity: IARC |
NO |
| Carcinogenity: OSHA |
NO |
| Explanation of Carcinogenity |
THIS PRODUCT'S INGREDIENTS, PRESENT AT EQUAL TO OR GREATER THAN 0.1%, ARE NOT LISTED BY OSHA, NTP OR IARC AS CARCINOGENS |
| Symptoms of Overexposure |
SEE ABOVE |
| Medical Cond. Aggrevated by Exposure |
PRE-EXISTING LUNG AND SKIN CONDITIONS |
| Emergency/First Aid Procedures |
[EYE] LIFT LIDS AND FLUSH IMMEDIATELY WITH CLEAN WATER FOR AT LEAST 15 MIN. SEEK IMMED MED ATTEN. [SKIN] FLUSH WITH PLENTY OF WATER AND WASH WITH SOAP. REMOVE CONTAMINATED CLOTHING AND LAUNDER BEFORE REUSE. IF IRRITATION PERSISTS OR ALLERGIC SYMPTOMS DEVELOP, SEEK MED ATTEN. [INGEST] NOT NORMAL ROUTE OF EXPOSURE. DO NOT INDUCE VOMITING. IMMEDIATELY RINSE MOUTH WITH WATER. DRINK ON GLASS OF WATER. SEEK IMMED MED ATTEN. [INHAL] MOVE TO FRESH AIR. SEEK MED ATTEN. GIVE OXYGEN OR ARTIFICIAL RESPIRATION AS NEEDED. KEEP WARM AND QUIET. SEEK IMMED MED ATTEN |
| Steps if Material Released/Spilled |
WEAR APPROPRIATE PERSONAL PROTECTION WHEN RESPONDING, AS SPECIFIED. CONTAIN SPILL WITH INERT ABSORBENT. TAKE MEASURES TO STOP SPILLAGE AT THE SOURCE. TRANSFER CONTAMINATED ABSORBENT INTO A CONTAINER FOR DISPOSAL IN ACCORDANCE WITH LOCAL REGULATIONS |
| Neutralizing Agent |
NR |
| Waste Disposal Method |
USE APPROPRIATE METHODS BASED ON FEDERAL AND PROVINCIAL STATUTES AND REGULATIONS AND LOCAL BY-LAWS. CONTACT LOCAL ENVIRONMENTAL AGENCY FOR SPECIFIC RULES AND INSTRUCTIONS |
| Handling and Storage Precautions |
AVOID CONTACT WITH EYES, SKIN OR CLOTHING. WASH THOROUGHLY AFTER HANDLING. APPLICATION OF ADHESIVE (PT A AND B) SHOULD BE DONE IN WELL VENTILATED AREA IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE PRACTICE (PART A AND B) RELEASE HEAT WHEN COMBINED. STORE IN A COOL, DRY AREA. KEEP AWAY FROM OPEN FLAMES |
| Other Precautions |
KEEP CONTAINERS CLOSED |
| Respiratory Protection |
IF VENTILATION IS INADEQUATE TO CONTROL VAPORS, NIOSH/MSHA-APPROVED AIR-PURIFYING RESPIRATORS ARE RECOMMENDED |
| Ventilation |
IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE PRACTICE, ENSURE ADEQUATE VENTILATION DURING APPLICATION |
| Protective Gloves |
IMPERVIOUS GLOVES TO PREVENT CONTACT |
| Eye Protection |
SAFETY GLASSES |
| Other Protective Equipment |
EMERGENCY EYEWASH, SHOWER |
| Work Hygenic Practices |
WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT |
| Supplemental Health/Safety Data |
NONE SPECIFIED BY MANUFACTURER |
