SOLDER(1), TIN ALLOY

Material Safety Data Sheet

`Item Name`
`Part Number/Trade Name`	`SOLDER ALLOYS CONTAINING LEAD`
`National Stock Number`	`3439010199100`
`CAGE Code`	`75297`
`Part Number Indicator`	`A`
`MSDS Number`	`129311`
`HAZ Code`	`B`

`Manufacturer Name`	`KESTER SOLDER COMPANY DIV OF LITTON SYSTEMS INC`
`Street`	`515 E TOUHY`
`City`	`DES PLAINES`
`State`	`IL`
`Country`	`US`
`Zip Code`	`60018-2675`
`Emergency Phone`	`708-297-1600`
`Information Phone`	`708-297-1600`

MSDS Preparer's Information

Alternate Vendors

Vendor #5 CAGE

BNMPH

`Specification Number`	`NOT APPLICABLE`
`Specification Type/Grade/Class`	`N/R`
`Hazard Storage Compatibility Code`	`N1`
`NRC License Number`	`NOT APPLICABLE`
`Net Propellant Weight (Ammo)`	`N/R`
`Appearance/Odor`	`SILVER-GRAY METAL IN BAR, WIRE, RIBBON OR PREFORMED SHAPES`
`Boiling Point`	`N/A`
`Melting Point`	`N/K`
`Vapor Pressure`	`N/A`
`Vapor Density`	`N/A`
`Specific Gravity`	`>1`
`Decomposition Temperature`	`N/A`
`Evaporation Rate`	`N/A`
`Solubility in Water`	`INSOLUBLE`
`Percent Volatiles by Volume`	`N/A`
`Chemical pH`	`N/A`
`Corrosion Rate`	`N/A`
`Container Pressure Code`	`4`
`Temperature Code`	`8`
`Product State Code`	`U`

`Flash Point Method`	`UNK`
`Lower Explosion Limit`	`N/A`
`Upper Explosion Limit`	`N/A`
`Extinguishing Media`	`N/A`
`Special Fire Fighting Procedures`	`USE NIOSH-APPROVED SELF-CONTAINED BREATHING APPARATUS IN CASE OF TOXIC LEAD FUMES`
`Unusual Fire/Explosion Hazards`	`FLUX IN CORED SOLDER MAY IGNITE WHEN THE SOLDER MELTS IN A FIRE`

`Stability`	`YES`
`Stability Conditions to Avoid`	`NONE`
`Materials to Avoid`	`STRONG ACID, STRONG OXIDIZERS`
`Hazardous Decomposition Products`	`N/A`
`Hazardous Polymerization`	`NO`
`Polymerization Conditions to Avoid`	`NOT APPLICABLE`
`LD50 - LD50 Mixture`	`UNKNOWN`

`Route of Entry: Skin`	`NO`
`Route of Entry: Ingestion`	`YES`
`Route of Entry: Inhalation`	`YES`
`Health Hazards - Acute and Chronic`	`INGESTION OF LEAD METAL CAN AFFECT KIDNEYS, GASTROINTESTINAL, REPRODUCTIVE AND NEUROLOGICAL SYSTEMS. INHALATION- OVER EXPOSURE TO LEAD MAY LEAD TO CNS DISORDERS`
`Carcinogenity: NTP`	`NO`
`Carcinogenity: IARC`	`NO`
`Carcinogenity: OSHA`	`NO`
`Explanation of Carcinogenity`	`NOT APPLICABLE`
`Symptoms of Overexposure`	`INHALATION- DROWSINESS, SEIZURES, COMA AND DEATH. EXPOSURE OF THIS MAGNITUDE ARE UNLIKELY`
`Medical Cond. Aggrevated by Exposure`	`PRE-EXISTING CONDITIONS OR DISEASES OF THE BLOOD AND BLOOD-FORMING ORGANS, KIDNEYS, NERVES AND POSSIBLY REPRODUCTIVE SYSTEM`
`Emergency/First Aid Procedures`	`EYES- FOR BURNS FLUSH IMMEDIATELY WITH COOL WATER. SKIN- FOR BURNS FLUSH IMMEDIATELY WITH COOL WATER. INHALAION- REMOVE PERSON FROM EXPOSURE TO FUMES. INGESTION- IF THOUGHT TO BE OVEREXPOSED, THE PERSON SHOULD HAVE A BLOOD LEAD ANALYSIS DONE`

`Steps if Material Released/Spilled`	`MELTED SOLDER WILL SOLIDIFY ON COOLING AND CAN BE SCRAPED UP. USE CAUTION TO AVOID BREATHING FUMES IF A GAS TORCH IS USED TO CUT UP LARGE PIECES`
`Neutralizing Agent`	`NONE`
`Waste Disposal Method`	`SOLDER CAN BE RECLAIMED`
`Handling and Storage Precautions`	`RE AWAY FROM SOURCES OF SULFUR. WASH HANDS AFTER HANDLING SOLDER CONTAINING LEAD. AVOID BREATHING FUMES DURING SOLDERING. NO`
`Other Precautions`	`NONE`

`Respiratory Protection`	`USUALLY NOT REQUIRED. WHEN VENTILATION IS NOT SUFFICIENT TO REMOVE FUMES FROM THE BREATHING ZONE, A CARTRIDGE TYPE RESPIRATOR SHOULD BE WORN`
`Ventilation`	`PROVIDE ADEQUATE EXHAUST VENTILATION TO MEET TLV REQUIREMENTS`
`Protective Gloves`	`NONE NORMALLY REQUIRED`
`Eye Protection`	`WHEN SOLDERING, USE GOGGLE`
`Other Protective Equipment`	`USE FACE SHIELD IF NEEDED`
`Work Hygenic Practices`	`WASH HANDS AFTER HANDLING THIS MATERIAL`
`Supplemental Health/Safety Data`	`NONE`
`Disposal Code`	`O`

`Container Quantity`	`1`
`Unit of Measure`	`LB`