| Item Name | |
| Part Number/Trade Name | TIN LEAD ANTIMONY ALLOY: XM-200 CORE |
| National Stock Number | 3439002733722 |
| CAGE Code | 84311 |
| Part Number Indicator | A |
| MSDS Number | 182951 |
| HAZ Code | B |
| Manufacturer Name | GARDINER SOLDER CO DIV GARDINER METAL CO |
| Street | 4820 SOUTH CAMPBELL AVENUE |
| City | CHICAGO |
| State | IL |
| Country | US |
| Zip Code | 60632-1494 |
| Emergency Phone | 312-847-0100, CHEMTREC 800-424-9300 |
| Information Phone | 312-847-0100 |
| Date MSDS Prepared/Revised | 01MAY90 |
| Date of Technical Review | 14NOV92 |
| Active Indicator | N |
| Vendor #1 Name | GARDINER SOLDER CO, DIV OF GARDINER META |
| Vendor #1 CAGE | 56244 |
| Vendor #5 CAGE | BPHPY |
| Specification Number | QQ-S-571 |
| Specification Type/Grade/Class | TYPE SN60WRMAP3 |
| Hazard Storage Compatibility Code | N1 |
| Appearance/Odor | SILVER GREY SOLID, ODORLESS |
| Boiling Point | 2516F,1380C |
| Melting Point | 361F,183C |
| Vapor Pressure | 1 AT 1626F |
| Vapor Density | N/R |
| Specific Gravity | 10 |
| Decomposition Temperature | UNKNOWN |
| Evaporation Rate | N/R |
| Solubility in Water | INSOLUBLE |
| Percent Volatiles by Volume | N/R |
| Chemical pH | N/R |
| Corrosion Rate | UNKNOWN |
| Container Pressure Code | 4 |
| Temperature Code | 8 |
| Product State Code | U |
| Flash Point Method | UNK |
| Lower Explosion Limit | N/R |
| Upper Explosion Limit | N/R |
| Extinguishing Media | DRY CHEMICAL. DO NOT USE WATER |
| Special Fire Fighting Procedures | FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA & FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE |
| Unusual Fire/Explosion Hazards | FIRE OR EXCESSIVE HEAT MAY CAUSE PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS |
| Stability | YES |
| Stability Conditions to Avoid | NONE |
| Materials to Avoid | STRONG OXIDIZING AGENTS. STRONG ACIDS |
| Hazardous Decomposition Products | TOXIC METAL FUMES ABOVE 886C(1627F). FROM THE ROSIN CORE; FORMALDEHYDE, CARBON MONOXIDE & DIOXIDE |
| Hazardous Polymerization | NO |
| Polymerization Conditions to Avoid | NONE |
| LD50 - LD50 Mixture | N/K |
| Route of Entry: Skin | YES |
| Route of Entry: Ingestion | NO |
| Route of Entry: Inhalation | YES |
| Health Hazards - Acute and Chronic | ACUTE-INHALATION OF FUMES(DURING SOLDERING): IRRITATION OF EYES AND RESPIRATORY TRACT SYSTEM. CHRONIC:LONG AND REPEATED EXPOSURE TO METAL FUMES MAY CAUSE HEADACHE, NAUSEA/VOMITING, ACHING BONES, FATIGUE, DECREASED APPETITE, ABDOMINAL CRAMPING, ANEMIA, BRAIN, HEART, LUNG, LIVER AND KIDNEY DEGENERATIVE CHANGES |
| Carcinogenity: NTP | NO |
| Carcinogenity: IARC | NO |
| Carcinogenity: OSHA | NO |
| Explanation of Carcinogenity | FORMALDEHYDE IS LISTED AS A PROBABLE CARCINOGEN BY NTP,IARC, EPA,& IT IS REGULATED BY OSHA |
| Symptoms of Overexposure | EXPOSURE TO FUMES MAY RESULT IN IRRITATION OF NOSE, THROAT, EYES AND SKIN. BURNS FROM SKIN CONTACT OF MOLTEN SOLDER. WATERY EYES, HEADACHE, BREATHING DIFFICULTY, FREQUENT COUGHING |
| Medical Cond. Aggrevated by Exposure | SOME WORKERS WITH PRE-EXISTING CONDITIONS OF LUNGS, EYES, SKIN, AND THOSE PREVIOUSLY EXPOSED TO LEAD & ANTMONY MAY BE AT INCREASED RISK |
| Emergency/First Aid Procedures | SKIN BURNS:FLUSH WITH COLD WATER OR APPLY ICE. IN CASE OF SEVERE BURNS GET MEDICAL HELP. EYE IRRITATION:FLUSH WITH WATER FOR 15 MINUTES. INHALATION:REMOVE TO FRESH AIR. ADMINISTER OXYGEN IF BREATHING IS DIFFICULT. IF NOT BREATHING, BEGIN ARTIFICIAL RESPIRATION. GET MEDICAL HELP. INGESTION:GET MEDICAL HELP |
| Steps if Material Released/Spilled | CLEAN UP ANY DUST OR WASTE RESIDUES AND PLACE IN SUITABLE DOT APPROVED CONTAINERS AND DISPOSE OF IN FULL COMPLIANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS. AVOID INHALATION AND SKIN EXPOSURE |
| Neutralizing Agent | NONE |
| Waste Disposal Method | DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE & LOCAL REGULATIONS |
| Handling and Storage Precautions | SPECIAL REQUIREMENTS FOR STORAGE. WEAR GLOVES AND FLAME RETARDANT CLOTHING WHEN SOLDERING. DO |
| Other Precautions | DO NOT BREATH FUMES WHILE SOLDERING |
| Respiratory Protection | USE FUME/ORGANIC VAPOR RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN SOLDERING IN A CONFINED SPACE OR WHERE LOCAL EXHAUST OR GENERAL VENTILATION DOES NOT KEEP EXPOSURE BELOW RECOMMENDED LIMITS. USE ONLY NIOSH APPROVED RESPIRATORS |
| Ventilation | USE ENOUGH VENTILATION WHEN SOLDERING TO KEEP THE DUST, FUMES & GASES BELOW TLV |
| Protective Gloves | LEATHER GLOVES |
| Eye Protection | OSHA APPROVED GOGGLES/FACE SHIELD |
| Other Protective Equipment | FLAME RETARDANT CLOTHING AND LEATHER GLOVES WHEN SOLDERING |
| Work Hygenic Practices | WASH THOROUGHLY BEFORE EATING OR SMOKING. LAUNDER CONTAMINATIED CLOTHING BEFORE REUSE |
| Protect Eye | YES |
| Protect Skin | YES |
| Protect Respiratory | YES |
| Chronic Indicator | UNKNOWN |
| Contact Code | MODERATE |
| Fire Code | UNKNOWN |
| Health Code | UNKNOWN |
| React Code | UNKNOWN |
| Container Quantity | 1 |
| Unit of Measure | LB |
| Volatile Organic Compounds (P/G) | 0 |
| Volatile Organic Compounds (G/L) | 0 |
| Ingredient # | 01 |
| Ingredient Name | (PBCPD) LEAD (SARA III) |
| CAS Number | 7439921 |
| NIOSH Number | OF7525000 |
| Proprietary | NO |
| Percent | 37.53 |
| OSHA PEL | 0.05 MG/M3;1910.1025 |
| ACGIH TLV | 0.15 MG/M3;DUST 9192 |
| Recommended Limit | O.O3 MG/M3 |
| Ingredient # | 02 |
| Ingredient Name | (SBCPD) ANTIMONY (SARA III) |
| CAS Number | 7440360 |
| NIOSH Number | CC4025000 |
| Proprietary | NO |
| Percent | .5 |
| OSHA PEL | 0.5 MG/M3 |
| ACGIH TLV | 0.5 MG SB/M3; 9192 |
| Recommended Limit | NONE SPECIFIED |
| Ingredient # | 03 |
| Ingredient Name | TIN |
| CAS Number | 7440315 |
| NIOSH Number | XP7320000 |
| Proprietary | NO |
| Percent | 61.5 |
| OSHA PEL | 2 MG/M3 |
| ACGIH TLV | 2 MG/M3; 9192 |
| Recommended Limit | NONE SPECIFIED |
| Ingredient # | 04 |
| Ingredient Name | ROSIN |
| CAS Number | 8050097 |
| NIOSH Number | 1003892RA |
| Proprietary | NO |
| Percent | 3 |
| OSHA PEL | 0.1MG/M3 FORMALDEHYD |
| ACGIH TLV | 0.1MG/M3 FORMALDEHYD |
| Recommended Limit | NONE SPECIFIED |