§761.19 References.

(a) [Reserved]

(b) Incorporation by reference. The following material is incorporated by reference, and is available for inspection at the Office of the Federal Register, 800 North Capitol St., NW., Suite 700, Washington, DC. These incorporations by reference were approved by the Director of the Office of the Federal Register. These materials are incorporated as they exist on the date of approval and a notice of any change in these materials will be published in the FEDERAL REGISTER. Copies of the incorporated material are available for inspection at the TSCA Nonconfidential Information Center (7407), Rm. B607, Northeast Mall, Office of Pollution Prevention and Toxics, Environmental Protection Agency, 401 M St., SW., Washington, DC 20460. Copies of the incorporated material may be obtained from the American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.

------------------------------------------------------------------------
             References                          CFR Citation
------------------------------------------------------------------------
ASTM D 93 - 90 Standard Test         § 761.71(b)(2)(vi); §
 Methods for Flash Point by Pensky-   761.75(b)(8)(iii)
 Martens Closed Tester.

1  1  ASTM D 129-64 (Reapproved      § 761.71(b)(2)(vi)
 1978) Standard Test Method for
 Sulfur in Petroleum Products
 (General Bomb Method).
ASTM D 240-87 Standard Test Method   § 761.71(b)(2)(vi)
 for Heat of Combustion of Liquid
 Hydrocarbon Fuel by Bomb
 Calorimeter.
ASTM D 482-87 Standard Test Method   § 761.71(b)(2)(vi)
 for Ash from Petroleum Products.
ASTM D 524-88 Standard Test Method   § 761.71(b)(2)(vi)
 for Ramsbottom Carbon Residue of
 Petroleum Products.
ASTM D 808-87 Standard Test Method   § 761.71(b)(2)(vi)
 for Chlorine in New and Used
 Petroleum Products (Bomb Method).
ASTM D 923-86 Standard Test Method   § 761.60(g)(1)(ii); (g)(2)(ii)
 for Sampling Electrical Insulating
 Liquids.
ASTM D 923-89 Standard Methods of    § 761.60(g)(1)(ii); (g)(2)(ii)
 Sampling Electrical Insulating
 Liquids.
ASTM D 1266-87 Standard Test Method  § 761.71(b)(2)(vi)
 for Sulfur in Petroleum Products
 (Lamp Method).
ASTM D 1796-83 (Reapproved 1990)     § 761.71(b)(2)(vi)
 Standard Test Method for Water and
 Sediment in Fuel Oils by the
 Centrifuge Method (Laboratory
 Procedure).
ASTM D 2158-89 Standard Test Method  § 761.71(b)(2)(vi)
 for Residues in Liquified
 Petroleum (LP) Gases.
ASTM D 2709-88 Standard Test Method  § 761.71(b)(2)(vi)
 for Water and Sediment in
 Distillate Fuels by Centrifuge.
ASTM D 2784-89 Standard Test Method  § 761.71(b)(2)(vi)
 for Sulfur in Liquified Petroleum
 Gases (Oxy-hydrogen Burner or
 Lamp).
ASTM D 3178-84 Standard Test         § 761.71(b)(2)(vi)
 Methods for Carbon and Hydrogen in
 the Analysis Sample of Coke and
 Coal.
ASTM D 3278-89 Standard Test         § 761.75(b)(8)(iii)
 Methods for Flash Point of Liquids
 by Setaflash Closed-Cup Apparatus.
ASTM E 258-67 (Reapproved 1987)      § 761.71(b)(2)(vi)
 Standard Test Method for Total
 Nitrogen Inorganic Material by
 Modified KJELDAHL Method.
------------------------------------------------------------------------

[47 FR 22098, May 21, 1982, as amended at 49 FR 29067, July 18, 1984; 49 FR 36648, Sept. 19, 1984; 53 FR 10391, Mar. 31, 1988; 53 FR 12524, Apr. 15, 1988; 53 FR 21641, June 9, 1988; 57 FR 13323, Apr. 16, 1992; 59 FR 33697, June 30, 1994; 60 FR 34465, July 3, 1995; 63 FR 35439, June 29, 1998; 64 FR 33759, June 24, 1999]