|
||||||
|---|---|---|---|---|---|---|
| Home | 29 CFR | 40 CFR | 49 CFR | Federal Register | MSDS Search | Purchase CFR e-Books |
§261.20 General.
(a) A solid waste, as defined in §261.2, which is not excluded from
regulation as a hazardous waste under §261.4(b), is a hazardous waste if it
exhibits any of the characteristics identified in this subpart. [Comment: §262.11 of this chapter sets forth the generator's
responsibility to determine whether his waste exhibits one or more of the
characteristics identified in this subpart] (b) A hazardous waste which is identified by a characteristic in this subpart
is assigned every EPA Hazardous Waste Number that is applicable as set forth in
this subpart. This number must be used in complying with the notification
requirements of section 3010 of the Act and all applicable recordkeeping and
reporting requirements under parts 262 through 265, 268, and 270 of this
chapter.
(c) For purposes of this subpart, the Administrator will consider a sample
obtained using any of the applicable sampling methods specified in appendix I to
be a representative sample within the meaning of part 260 of this chapter. [Comment: Since the appendix I sampling methods are not being formally
adopted by the Administrator, a person who desires to employ an alternative
sampling method is not required to demonstrate the equivalency of his method
under the procedures set forth in §§260.20 and 260.21.] [45 FR 33119, May 19, 1980, as amended at 51 FR 40636, Nov. 7, 1986;
55 FR 22684, June 1, 1990; 56 FR 3876, Jan. 31, 1991]