Title 40 -- Protection of Environment
Home 29 CFR 40 CFR 49 CFR Federal  Register MSDS Search Purchase CFR e-Books

 

PART 1065 -- TEST PROCEDURES AND EQUIPMENT

   
Subpart A -- Applicability and General Provisions

      §1065.1 Applicability.
      §1065.5 Overview of test procedures.
      §1065.10 Other test procedures.
      §1065.15 Engine testing.
      §1065.20 Limits for test conditions.
   
Subpart B -- Equipment and Analyzers

      §1065.101 Overview.
      §1065.105 Dynamometer and engine equipment specifications.
      §1065.110 Exhaust gas sampling system; spark-ignition (SI) engines.
      §1065.115 Exhaust gas sampling system; compression-ignition engines. [Reserved]
      §1065.120 Raw sampling. [Reserved]
      §1065.125 Analyzers (overview/general response characteristics).
      §1065.130 Hydrocarbon analyzers.
      §1065.135 NOX analyzers.
      §1065.140 CO and CO2 analyzers.
      §1065.145 Smoke meters. [Reserved]
      §1065.150 Flow meters.
      §1065.155 Temperature and pressure sensors.
   
Subpart C -- Test Fuels and Analytical Gases

      §1065.201 General requirements for test fuels.
      §1065.205 Test fuel specifications for distillate diesel fuel. [Reserved]
      §1065.210 Test fuel specifications for gasoline.
      §1065.215 Test fuel specifications for natural gas.
      §1065.220 Test fuel specifications for liquefied petroleum gas.
      §1065.240 Lubricating oils.
      §1065.250 Analytical gases.
   
Subpart D -- Analyzer and Equipment Calibrations

      §1065.301 Overview.
      §1065.305 International calibration standards.
      §1065.310 CVS calibration. [Reserved]
      §1065.315 Torque calibration.
   
Subpart E -- Engine Selection, Preparation, and Service Accumulation

      §1065.401 Selecting a test engine.
      §1065.405 Preparing and servicing a test engine.
      §1065.410 Service limits for stabilized test engines.
      §1065.415 Durability demonstration.
   
Subpart F -- Running an Emission Test

      §1065.501 Overview of the engine dynamometer test procedures.
      §1065.510 Engine mapping procedures.
      §1065.515 Test cycle generation.
      §1065.520 Engine starting, restarting, and shutdown.
      §1065.525 Engine dynamometer test run.
      §1065.530 Test cycle validation criteria.
   
Subpart G -- Data Analysis and Calculations

      §1065.601 Overview.
      §1065.605 Required records.
      §1065.610 Bag sample analysis.
      §1065.615 Bag sample calculations.
   
Subpart I -- Testing With Oxygenated Fuels

      §1065.801 Applicability.
      §1065.805 Sampling system.
      §1065.810 Calculations.
   
Subpart J -- Field Testing

      §1065.901 Applicability.
      §1065.905 General provisions.
      §1065.910 Measurement accuracy and precision.
      §1065.915 Equipment specifications for SI engines.
      §1065.920 Equipment setup and test run for SI engines.
      §1065.925 Calculations.
      §1065.930 Specifications for mass air flow sensors.
      §1065.935 Specifications for THC analyzers.
      §1065.940 Specifications for NOX and air/fuel sensors.
      §1065.945 Specifications for CO analyzers.
      §1065.950 Specifications for speed and torque measurement.
   
Subpart K -- Definitions and Other Reference Information

      §1065.1001 Definitions.
      §1065.1005 Symbols, acronyms, and abbreviations.
      §1065.1010 Reference materials.
      §1065.1015 Confidential information.