Material Safety Data Sheet

SECTION I - Material Identity
SECTION II - Manufacturer's Information
SECTION III - Physical/Chemical Characteristics
SECTION IV - Fire and Explosion Hazard Data
SECTION V - Reactivity Data
SECTION VI - Health Hazard Data
SECTION VII - Precautions for Safe Handling and Use
SECTION VIII - Control Measures
SECTION IX - Label Data
SECTION X - Transportation Data
SECTION XI - Site Specific/Reporting Information
SECTION XII - Ingredients/Identity Information

SECTION I - Material Identity
Item Name                               
Part Number/Trade Name                   13415 BARRETT ADDITIVE A INORGANIC SALT
National Stock Number                    3426P13415
CAGE Code                                0PX54
Part Number Indicator                    A
MSDS Number                              193872
HAZ Code                                 B

SECTION II - Manufacturer's Information
Manufacturer Name                        MACDERMID INC
Street                                   245 FREIGHT STREET
City                                     WATERBURY
State                                    CT
Country                                  US
Zip Code                                 06702-1815
Emergency Phone                          800-424-9300
Information Phone                        (203) 575-5700 (FAX 203-575-5916)

MSDS Preparer's Information
Date MSDS Prepared/Revised               25OCT01
Active Indicator                         Y

Alternate Vendors

SECTION III - Physical/Chemical Characteristics
Appearance/Odor                          SOLID WHITE PELLETS/ODORLESS
Vapor Pressure                           NA
Specific Gravity                         1.569
Solubility in Water                      APPRECIABLE
Container Type                           R
Container Pressure Code                  4
Temperature Code                         8
Product State Code                       S

SECTION IV - Fire and Explosion Hazard Data
Flash Point Method                       UNK
Extinguishing Media                      NEVER ALLOW RUN-OFF TO ENTER SEWERS OR WATERWAYS. DRY CHEMICAL, CARBON DIOXIDE, FOAM, WATER. AS APPROP. FOR SURROUNDING MATERIAL
Special Fire Fighting Procedures         WEAR SCBA
Unusual Fire/Explosion Hazards           UNKNOWN

SECTION V - Reactivity Data
Stability                                YES
Stability Conditions to Avoid            UNK
Materials to Avoid                       ALKALINE MATERIALS & OXIDIZERS
Hazardous Decomposition Products         HYDROGEN CHLORIDE UPON DECOMPOSITION. ABOVE 572 F, WILL EMIT TOXIC FUMES OF CHLORINE
Hazardous Polymerization                 NO
Polymerization Conditions to Avoid       WILL NOT OCCUR

SECTION VI - Health Hazard Data
Route of Entry: Skin                     U
Route of Entry: Ingestion                U
Route of Entry: Inhalation               U
Health Hazards - Acute and Chronic       [EYE] MAY CAUSE MODERATE IRRITATION W/ CORNEAL INJURY [SKIN] MAY CAUSE IRRITATION [INGEST] MODERATELY TOXIC IF SWALLOWED. MAY CAUSE NAUSEA; VOMITING; DIARRHEA [INHALE] IRRITATION OF MUCOUS MEMBRANE OR NOSE/MOUTH/THROAT MAY OCCUR 
Emergency/First Aid Procedures           [EYE] IMMED. FLUSH W/ LARGE QUANTITIES OF WATER FOR AT LEAST 15 MIN. & CALL A PHYSICIAN [SKIN] REMOVE CONTAMINATED CLOTHING, WASH SKIN W/ SOAP & WATER. IF IRRITATION DEVELOPS, CONTACT A PHYSICIAN [INGEST] RINSE THE MOUTH & THROAT W/ WATER. NOTIFY PHYSICIAN OF THE NATURE OF INGESTED PRODUCT [INHALE[ REMOVE TO FRESH AIR. CONSULT PHYSICIAN IF DISCOMFORT PERSISTS 

SECTION VII - Precautions for Safe Handling and Use
Steps if Material Released/Spilled       AVOID DUSTING, SWEEP UP & COLLECT FOR DISPOSAL IN PLASTIC RECOVERY DRUM. DO NOT RETURN TO ORIGINAL CONTAINER. FLUSH RESIDUE TO CHEMICAL DRAIN W/ LARGE QUANTITIES OF WATER 
Waste Disposal Method                    DISPOSE OF BY AN APPROVED METHOD AT AN APPROVED SECURE FACILITY 
Handling and Storage Precautions         STORAGE TEMP: MAXIMUM - 120 F. MATERIAL SHOULD BE STORED IN THE PROPERLY SEALED ORIGINAL CONTAINER

SECTION VIII - Control Measures
Respiratory Protection                   IF TLV/PEL IS EXCEEDED, A NIOSH APPROVED RESPIRATOR SHOULD BE USED 
Ventilation                              GENERAL IS RECOMMENDED. LOCAL IS RECOMMENDED WHERE VAPORS, DUSTS, MISTS OR AEROSOLS MAY BE RELEASED 

SECTION IX - Label Data
Protect Eye                              NO
Protect Skin                             NO
Protect Respiratory                      NO
Chronic Indicator                        UNKNOWN
Contact Code                             UNKNOWN
Fire Code                                UNKNOWN
Health Code                              UNKNOWN
React Code                               UNKNOWN

SECTION X - Transportation Data

SECTION XI - Site Specific/Reporting Information
Volatile Organic Compounds (P/G)         0
Volatile Organic Compounds (G/L)         0

SECTION XII - Ingredients/Identity Information
Ingredient #                             01
Ingredient Name                          MAGNESIUM CHLORIDE (MGCL2)
CAS Number                               7786303
Percent                                  70