| Item Name | |
| Part Number/Trade Name | CHELATOR ME 1010 B REPLENISHER 75056 |
| National Stock Number | 8030P75056 |
| CAGE Code | 76071 |
| Part Number Indicator | A |
| MSDS Number | 180425 |
| HAZ Code | B |
| Manufacturer Name | MACDERMID |
| Street | 245 FREIGHT ST |
| City | WATERBURY |
| State | CT |
| Country | US |
| Zip Code | 06702 |
| Emergency Phone | 800-424-9300 |
| Information Phone | 203-575-5700 |
| Date MSDS Prepared/Revised | 22APR96 |
| Active Indicator | N |
| Appearance/Odor | PALE YELLOW TO AMBER/ODORLESS |
| Vapor Pressure | ND |
| Specific Gravity | 1.140 |
| Solubility in Water | COMPLETE |
| Chemical pH | 1 |
| Container Pressure Code | 4 |
| Temperature Code | 8 |
| Product State Code | L |
| Flash Point Method | UNK |
| Extinguishing Media | FLOOD W/WATER.FO RMASSIVE FIRES USE UNMANNED HOSE HOLDER OR MONITOR NOZZLE.NEVER ALLOW RUN-OFF TO ENTER SEWERS OR WATERW |
| Special Fire Fighting Procedures | WAER SCBA BREATHING APPARATUS/PROTECTIVE CLOTHING |
| Unusual Fire/Explosion Hazards | NONE |
| Stability | YES |
| Stability Conditions to Avoid | CONTACT W/PERSULFATES LIBERATES CHLORINE GAS |
| Materials to Avoid | ALKALINE MATERIALS. OXIDIZERS |
| Hazardous Decomposition Products | TOXIC CHLORINE FUMES |
| Hazardous Polymerization | NO |
| Polymerization Conditions to Avoid | WILL NOT OCCUR |
| Route of Entry: Skin | YES |
| Route of Entry: Ingestion | YES |
| Route of Entry: Inhalation | YES |
| Health Hazards - Acute and Chronic | EYE:SEVER BURN, BLINDNESS.SKING:BURNING SENSATION,DAMAGE TO TISSUE.INGEST:BURNING,PAIN.INHALE:IRRITATION |
| Symptoms of Overexposure | EYE:INTENSE WARTERING.EYE:BURNING SENSATION.INGEST:STOMACH OR ABDOMINAL PAIN MAY DEVELOP.INHALE:IRRITATIONOF MUCOUS MEMBRANE OF NOSE/MOUTH/THROAT MAY OCCUR |
| Emergency/First Aid Procedures | EYE:IMMED FLUSH W/WATER FOR >15MIN.SEEK IMMED MED ATTEN.SKIN:WASH W/WATER FOR >15MIN.CONTACT PHYSICIAN.INGEST:RINSE MOUTH AND THROAT LIVERALLY WITH WATER.GIVE WATER.CONTACT PHYSICIAN.INHALE;REMOVE TO FRESH AIR AND CALL PHYSICIAN IMMED |
| Steps if Material Released/Spilled | SOAK INTO INERT ABSORBENT.DO NOT USE SAWDUST OR OTHER ORGANIC MATERIALS.COLLECT FOR DISPOSAL IN PLACTIC RECOVERY DURMS. FLUSH RESIDUE W/PLENTYOF WATER TO CHEMICAL DRAIN |
| Waste Disposal Method | ACCORDANCE WITH ALL LOCAL, STATE, AND FEDERAL REQULATIONS |
| Handling and Storage Precautions | STORAGE TEMP MAX 120F MIN 48F.STORE IN PROPERLY SEALED ORIGINAL CONTAINER.WEAR PROTECTIVE CLOTHING AND EQUIPMENT WHILE HANDLING |
| Respiratory Protection | IF ABOVE TLV, NIOSH APPROVED RESPIRATOR SHOULD BE USED |
| Ventilation | GENERAL AND LOCAL RECOMMENDED |
| Protective Gloves | CHEMIAL RESISTANT GLOVES |
| Eye Protection | SAFETY GLASSES SP GOGGLES.FACE SHIELD |
| Other Protective Equipment | EYE WASH,CHEMICAL RESISTANT APRON,BOOTS |
| Work Hygenic Practices | WASH CONTAMINATED CLOTHING BEFORE REUSE |
| Supplemental Health/Safety Data | CORROSIVE MATERIAL!!! |
| Disposal Code | O |
| Protect Eye | YES |
| Protect Skin | YES |
| Protect Respiratory | NO |
| Chronic Indicator | UNKNOWN |
| Contact Code | SEVERE |
| Fire Code | UNKNOWN |
| Health Code | UNKNOWN |
| React Code | UNKNOWN |
| Container Quantity | 5 |
| Unit of Measure | GL |