| Item Name | |
| Part Number/Trade Name | ER70S-6 PINNACLE ALLOYS COPPER COATED WELDING WIRE |
| National Stock Number | 3439L4162792027 |
| CAGE Code | 27911 |
| Part Number Indicator | A |
| MSDS Number | 192402 |
| HAZ Code | B |
| Manufacturer Name | J. W. HARRIS CO., INC. (DIST CHRISTENSEN WELDING) |
| Street | 4501 QUALITY PLACE |
| City | MASON |
| State | OH |
| Country | US |
| Zip Code | 45040 |
| Emergency Phone | 800-424-9300 CHEMTREC |
| Information Phone | 800-733-4043 |
| Date MSDS Prepared/Revised | 07MAR02 |
| Active Indicator | Y |
| Specification Number | NR |
| Appearance/Odor | SOLID WIRE ROD WHICH IS COPPER COATED |
| Boiling Point | 3000 C |
| Melting Point | 1535 C |
| Vapor Pressure | 0 |
| Vapor Density | NA |
| Specific Gravity | 7.86 |
| Evaporation Rate | NA |
| Solubility in Water | INSOLUBLE |
| Chemical pH | NA |
| Container Pressure Code | 1 |
| Temperature Code | 4 |
| Product State Code | S |
| Flash Point Method | NA |
| Lower Explosion Limit | NA |
| Upper Explosion Limit | NA |
| Extinguishing Media | WATER SPRAY, HALON, DRY CHEMICAL, CARBON DIOXIDE, FOAM OR ANY OTHER "ABC" CLASS EXTINGUISHER |
| Special Fire Fighting Procedures | NOT APPLICABLE |
| Unusual Fire/Explosion Hazards | WHEN INVOLVED IN A FIRE, THESE PRODUCTS MAY DECOMPOSE AND PRODUCE IRRITATING FUMES CONTAINING IRON COMPOUNDS AND METAL OXIDES. THE MOLTEN MATERIAL CAN PRESENT A SIGNIFICANT THERMAL HAZARD FIREFIGHTERS |
| Stability | YES |
| Stability Conditions to Avoid | UNCONTROLLED EXPOSURE TO EXTREME TEMPERATURES, INCOMPATIBLE MATERIALS |
| Materials to Avoid | STRONG ACIDS, OXIDIZERS, MINERAL ACIDS, AND HALOGENS |
| Hazardous Decomposition Products | IRON COMPOUNDS AND METAL OXIDES |
| Hazardous Polymerization | NO |
| Polymerization Conditions to Avoid | WILL NOT OCCUR |
| LD50 - LD50 Mixture | NR |
| Route of Entry: Skin | YES |
| Route of Entry: Ingestion | YES |
| Route of Entry: Inhalation | YES |
| Health Hazards - Acute and Chronic | [INHAL] IS NOT ANTICIPATED TO BE A SIGNIFICANT ROUTE OF OVER-EXPOSURE. [SKIN] NOT ANTICIPATED TO BE IRRITATING. [EYE] CAN BE PHYSICALLY DAMAGING TO EYES. FUMES GENERATED DURING WELDING CAN BE IRRITATING. [INGEST] NOT ANTICIPATED TO BE A ROUTE OF EXPOSURE FOR THIS PRODUCT |
| Carcinogenity: NTP | NO |
| Carcinogenity: IARC | NO |
| Carcinogenity: OSHA | NO |
| Explanation of Carcinogenity | CARBON A COMPONENT OF THESE PRODUCTS IS ON IARC AND NIOSH LISTS |
| Symptoms of Overexposure | SEE ABOVE |
| Medical Cond. Aggrevated by Exposure | NR |
| Emergency/First Aid Procedures | [SKIN] |
| Steps if Material Released/Spilled | NOT APPLICABLE |
| Neutralizing Agent | NR |
| Waste Disposal Method | WASTE DISPOSAL MUST BE IN ACCORDANCE WITH APPROPRIATE FEDERAL, STATE, AND LOCAL REGULATIONS. THESE PRODUCTS IF UNALTERED BY USE, MAY BE DISPOSED OF BY TREATMENT AT A PERMITTED FACILITY OR AS ADVISED BY YOUR LOCAL HAZARDOUS WASTE REGULATORY AUTHORITY |
| Handling and Storage Precautions | ALL EMPLOYEES WHO HANDLE THESE PRODUCTS SHOULD BE TRAINED TO HANDLE THEM SAFELY. USE IN A WELL VENTILATED LOCATION. AVOID BREATHING FUMES GENERATED DURING BRAZING OPERATIONS. PACKAGES MUST BE PROPERLY LABELED. STORE CONTAINERS IN A COOL, DRY LOCATION. STORE AWAY FROM INCOMPATIBLE MATERIALS |
| Other Precautions | WHEN THESE PRODUCTS ARE USED DURING BRAZING OPERATIONS, IT IS RECOMMENDED THAT THE REQUIREMENTS OF THE FEDERAL OCCUPATIONAL SAFETY AND HEALTH WELDING AND CUTTING STANDARD AND THE SAFELY STANDARDS OF THE AMERICAN NATIONAL STANDARDS INSTITUTE FOR WELDING AND CUTTING BE FOLLOWED |
| Respiratory Protection | IF NEEDED A WELD FUME RESPIRATOR OR AIR LINE RESPIRATOR FOR BRAZING IN CONFINED SPACES. USE ONLY PROTECTION AUTHORIZED IN 29 CFR 1910.134 OR APPLICABLE STATE REGULATIONS |
| Ventilation | ADEQUATE VENTILATION TO ENSURE EXPOSURE LEVELS ARE MAINTAINED BELOW PEL |
| Protective Gloves | TO PROTECT FROM SPARKS AND FLAME |
| Eye Protection | SAFETY GLASSES, GOGGLES OR FACE SHIELD |
| Other Protective Equipment | EYE WASH, SAFETY SHOWER |
| Work Hygenic Practices | NR |
| Supplemental Health/Safety Data | USE BODY PROTECTION APPROPRIATE FOR TASK |
| Protect Eye | NO |
| Protect Skin | NO |
| Protect Respiratory | NO |
| Chronic Indicator | UNKNOWN |
| Contact Code | UNKNOWN |
| Fire Code | UNKNOWN |
| Health Code | UNKNOWN |
| React Code | UNKNOWN |
| Volatile Organic Compounds (P/G) | 0 |
| Volatile Organic Compounds (G/L) | 0 |
| Ingredient # | 01 |
| Ingredient Name | CARBON |
| CAS Number | 7440440 |
| Proprietary | NO |
| Percent | 0.070 |
| Ingredient # | 02 |
| Ingredient Name | (CRCPD) CHROMIUM |
| CAS Number | 7440473 |
| Proprietary | NO |
| Percent | 0.050 |
| Ingredient # | 03 |
| Ingredient Name | (NICPD) NICKEL |
| CAS Number | 7440020 |
| Proprietary | NO |
| Percent | 0.030 |
| Ingredient # | 04 |
| Ingredient Name | MOLYBDENUM |
| CAS Number | 7439987 |
| Proprietary | NO |
| Percent | 0.030 |
| Ingredient # | 05 |
| Ingredient Name | (MNCPD) MANGANESE |
| CAS Number | 7439965 |
| Proprietary | NO |
| Percent | 1.440 |
| Ingredient # | 06 |
| Ingredient Name | *SILICON |
| CAS Number | 7440213 |
| Proprietary | NO |
| Percent | 0.830 |
| Ingredient # | 07 |
| Ingredient Name | (CUCPD) COPPER |
| CAS Number | 7440508 |
| Proprietary | NO |
| Percent | 0.060 |
| Ingredient # | 08 |
| Ingredient Name | PHOSPHORUS |
| CAS Number | 7723140 |
| Proprietary | NO |
| Percent | 0.012 |
| Ingredient # | 09 |
| Ingredient Name | TIN |
| CAS Number | 7440315 |
| Proprietary | NO |
| Percent | 0.004 |
| Ingredient # | 10 |
| Ingredient Name | ALUMINUM |
| CAS Number | 7429905 |
| Proprietary | NO |
| Percent | 0.002 |